Edgecombe, Hodges Bridge, Boundary Road - New Bridge Load Limit

Hodges Bridge is located over Campaspe River on Boundary Road, Edgecombe - 141m from Barkers Road intersection.

The project included consultation, design and investigation for future works on the historical bridge.

These works were funded by the 2023/24 Capital Works Program.  

July 2024 update

Hodge’s Bridge on Boundary Road, Edgecombe is a single lane bridge, bordering both Mount Alexander Shire Council and Macedon Ranges Shire Council. Located between Barkers Road and Kyneton-Metcalfe Road, it provides access over the Campaspe River.

It was built circa 1880s, heritage-listed under both council’s planning schemes for its impressive bluestone abutments and piers.

To ensure safety and preserve its historic charm, Load limit reduction and speed advisory measures have now been implemented for Hodge’s Bridge on Boundary Road, Edgecombe.

Engineering assessments had found the bridge structure to have been deteriorating over the years. To support its long-term viability and ensure safety of road users, interim measures will see the bridge’s load limit reduced from 12 tonnes down to 2.5 tonnes, with an advisory crossing speed limit of 20km/h.

With a recorded low volume of traffic and only a small number of nearby residents, these interim changes will mean that vehicles under the new load limit will still be able to safely use the bridge, until a more permanent, long-term solution is investigated. For vehicles over the load limit, detours are now in place via surrounding roads, with only minor delays expected. The signage advising of the reduced load limit was installed in the area on 4 July 2024.

Both councils will continue conversations around the bridge’s long-term future and update the community accordingly.

Location

Boundary Road, Edgecombe 3444  View Map

Google Map